ELCB Price in India 2026: Brand wise Rate List, Sizes and Where to Buy
Every safe home wiring setup needs one thing that many people skip until it is too late: a device that cuts off power the moment a leakage current is detected. This is exactly why so many homeowners, electricians and contractors search for the ELCB price and the RCCB price before finalising their distribution board. Whether you are wiring a new flat, upgrading an old panel, or simply replacing a faulty unit, this guide from Elecload breaks down the current rates, the sizes available and what actually separates a good ELCB from an average one.
What Is an ELCB and How Is It Different from an RCCB
ELCB stands for Earth Leakage Circuit Breaker, and RCCB stands for Residual Current Circuit Breaker. In practice, most electricians in India use these two terms almost interchangeably, and product listings across the market often bundle them under one category, which is why the RCCB price and the ELCB price are usually compared side by side.
The core function of both devices is the same. They constantly monitor the current flowing through the live and neutral wires. If even a small amount of current starts leaking to earth, for example through a damaged wire or a person accidentally touching a live part, the device trips within milliseconds and disconnects the circuit. This single feature is what prevents electric shocks and reduces the risk of electrical fires caused by earth faults.
The technical difference is that a true ELCB senses current through an actual earth wire connection. In contrast, an RCCB senses the imbalance between live and neutral current directly, which makes it slightly more reliable in installations where the earthing quality can vary. Because of this, most modern distribution boards now use RCCBs, though the term ELCB is still widely searched and used.
Why Does ELCB and RCCB Price Vary So Much
If you have already compared a few listings, you may have noticed that the ELCB price can range from around ₹1,500 to well over ₹4,000 for what looks like a similar sized unit. A few factors explain this gap.
Number of poles: A double pole (DP) unit is used for single phase connections and protects the live and neutral lines. A Four Pole (FP) unit is used for three phase connections and protects all three phases along with the neutral. FP units always cost more than DP units of the same amperage because they contain more internal switching mechanisms.
Current rating: Devices are commonly available in 25 amp, 40 amp and 63 amp ratings. A 63 amp unit is built for a higher continuous load and generally costs more than a 25 amp unit from the same brand.
Sensitivity: Most residential units are rated at 30 mA sensitivity, which is the standard for shock protection in homes. Industrial applications sometimes use higher sensitivity ratings depending on the load profile.
Brand and certification: Brands that invest heavily in BIS certification, ISI marking and in house testing labs tend to price their products higher than lesser known brands. This is generally a fair trade off, since a genuine, certified device is far more dependable in an actual fault condition.
ELCB Price and RCCB Price List in India 2026
Below is a current brand wise snapshot of RCCB price and ELCB price ranges for Double Pole and Four Pole units across the amperages that Indian homes and offices commonly use. These are live catalog prices from Elecload at the time of writing and may shift slightly with market conditions, so we recommend checking the RCCB and ELCB category page for the latest figures before ordering.
| Brand | Rating | Type | Price Range |
|---|---|---|---|
| Hager | 25A | Double Pole | ₹2,205 to ₹2,480 |
| Hager | 25A | Four Pole | ₹3,115 to ₹3,310 |
| Hager | 40A | Double Pole | ₹2,785 to ₹2,875 |
| Hager | 40A | Four Pole | ₹3,050 to ₹3,370 |
| Hager | 63A | Double Pole | ₹3,120 to ₹3,395 |
| Hager | 63A | Four Pole | ₹3,455 to ₹3,890 |
| IndoAsian | 25A | Double Pole | ₹1,790 onward |
| IndoAsian | 25A | Four Pole | ₹2,345 onward |
| IndoAsian | 40A | Double Pole | ₹1,983 onward |
| IndoAsian | 40A | Four Pole | ₹2,394 onward |
| IndoAsian | 63A | Double Pole | ₹2,527 onward |
| Legrand | 25A | Double Pole | ₹2,283 to ₹2,557 |
| Legrand | 25A | Four Pole | ₹3,226 to ₹3,503 |
| Legrand | 40A | Double Pole | ₹2,650 to ₹3,050 |
| Legrand | 63A | Double Pole | ₹3,258 to ₹3,471 |
| LnT | 25A | Double Pole | ₹1,568 to ₹1,623 |
| LnT | 40A | Double Pole | ₹1,730 to ₹1,752 |
| LnT | 100A | Four Pole | ₹4,067 to ₹4,216 |
As the table shows, LnT and IndoAsian units generally sit at the more accessible end of the RCCB price spectrum. In contrast, Hager and Legrand units are priced slightly higher, reflecting their build quality and finish. All the models listed above are ISI marked and BIS certified, and each is made in India.
Double Pole vs Four Pole: Which One Do You Need
- Double Pole (DP): Choose this if your home or shop runs on a single phase electricity connection, which is the case for most residential flats and small shops in India
- Four Pole (FP): Choose this if your premises have a three phase connection, which is common in larger homes, commercial establishments, workshops and industrial units
Getting this choice wrong means the device will not fit or function correctly with your existing distribution board, so always confirm your connection type before purchase.
Choosing the Right Amperage
- 25 amp: Suitable for a single circuit or a small residential panel with limited load
- 40 amp: Suitable for a full flat or a mid sized commercial space with multiple circuits
- 63 amp: Suitable for larger homes, bigger shops, or as a main incomer protection device on the distribution board
An electrician can calculate your total connected load and recommend the correct amperage so the device does not trip unnecessarily under normal use, while still tripping reliably during an actual fault.
Building a Complete and Safe Distribution Panel
An ELCB or RCCB works best as part of a properly planned electrical panel rather than as a standalone purchase. Here is what most installations pair it with.
Distribution board: For a single phase home, an SPN distribution board is the standard enclosure used to house the main switch, the RCCB and the branch MCBs together in an organised layout, and it is easy to match with your chosen ELCB rating.
Wiring behind the panel: Larger loads and outdoor or underground runs are often wired using armoured cables for extra mechanical protection. In contrast, a 4 core cable is the typical choice for three phase connections feeding an FP distribution board.
Junction points: Any wiring that branches off from the main panel usually needs a PVC junction box at the joint to keep connections insulated and safe from moisture.
Switches and controls: Once the panel is wired, most rooms still need basic controls such as one way switches for lights and points, along with a fan regulator for speed control. For fan speed control, the anchor fan regulator is a reliable and widely used option.
Buying Tips Before You Order an ELCB or RCCB
- Always confirm whether you need a Double Pole unit for single phase or a Four Pole unit for three phase supply
- Match the amperage to your actual connected load rather than buying the highest rating by default
- Check for the ISI mark and BIS certification number printed on the product body and packaging
- Compare the total ELCB price across two or three trusted brands rather than choosing the very first listing you see
- Keep the original invoice safe, since genuine units from authorised sellers carry a full manufacturer’s warranty
- Get the device tested by pressing the test button once installed, to confirm it trips correctly
Where to Buy Genuine ELCB and RCCB Online in India
Elecload India has been supplying genuine electrical products since 2019, sourcing directly from authorised brand channels for names such as Hager, Legrand, IndoAsian, LnT, Havells, Schneider Electric and Siemens. Every RCCB and ELCB listed on our platform is 100 percent genuine and backed by a full manufacturer’s warranty, with transparent pricing and fast delivery across India. Visit the RCCB and ELCB category page to compare current rates and place your order, or explore our RCBO range if you need combined overload and earth leakage protection in a single device.
Frequently Asked Questions
1. What is the average ELCB price in India right now?
Based on current Elecload listings, Double Pole units start from around ₹1,568 for a 25 amp LnT model and go up to around ₹3,890 for a 63 amp Four Pole Hager unit. The exact figure depends on the brand, the pole configuration and the amperage you choose.
2. Is the RCCB price generally higher than the ELCB price?
Since most current listings, including ours, use the terms RCCB and ELCB for the same category of device, the RCCB price and ELCB price ranges are effectively the same. The bigger price difference comes from the pole type and amperage rather than the naming.
3. Which brand offers the best value for an ELCB or RCCB?
It depends on your budget and priorities. LnT and IndoAsian units are priced more accessibly and are ISI marked, while Hager and Legrand units sit at a slightly higher price point and are well regarded for build quality. All brands available on Elecload meet BIS certification requirements.
4. Do I need a four pole ELCB for my home?
Only if your home has a three phase electricity connection. Most residential flats in India run on a single phase supply, so a Double Pole unit is usually sufficient.
5. What amperage ELCB should I choose for a 2 BHK flat?
A 40 amp Double Pole unit is generally adequate for a typical 2 BHK flat with standard lighting, fan and socket loads. For larger homes or heavier appliance loads, a 63 amp unit is a safer choice, and an electrician can confirm this based on your actual load.
6. Can an ELCB be installed in an existing SPN distribution board?
Yes, most ELCB and RCCB units are designed to fit directly into a standard SPN distribution board alongside the main switch and branch MCBs, as long as the board has the correct module width available.
7. Does the wiring behind the panel affect ELCB performance?
The device itself works independently of the cable type, but using proper armoured cables or a correctly rated 4 core cable for the incoming supply ensures the overall installation is safe and reduces the chance of a fault occurring in the first place.
8. How often should an ELCB or RCCB be tested?
It is good practice to press the built in test button every one to three months to confirm the device trips correctly. If it fails to trip during a test, the unit should be replaced immediately.
9. What other electrical accessories are commonly bought along with an ELCB?
Most customers pair their ELCB purchase with a distribution board, a PVC junction box for wiring joints, one way switches for room points, and sometimes a fan regulator for speed control, since these are all part of a standard home wiring setup.
10. Where can I buy a genuine, ISI marked ELCB or RCCB online in India?
You can buy genuine ELCB and RCCB units directly from Elecload India. We source every unit from authorised brand channels, list transparent pricing for each amperage and pole configuration, and deliver across India with full manufacturer warranty on every product.
